Wavecom G900 Manuel d'utilisateur télécharger pdf (Page 34)

Wavecom GSM Modem

This confidential document is the property of WAVECOM and may not be copied or circulated without permission

1 If CBM is stored into ME/TA, indication of the memory location is routed

to the TE using unsolicited result code :

+CBMI : <mem>, <index>

2 New CBMs are routed directly to the TE using unsolicited result code.

+CBM : <length><CR><LF><pdu> (if PDU mode chosen)

+CBM :<sn>,<mid>, <dcs>,<page>,<pages><CR><LF><data> (text

mode-enabled)

3 class 3 SMS-DELIVERS are routed directly using code in <mt>=2 ;

message of other classes result in indication <mt>=1

<ds> (for SMS-STATUS-REPORTs) :

0 no SMS-STATUS-REPORTs are routed.

1 SMS-STATUS-REPORTs are routed using unsolicited code :

+CDS : <pdu> (if PDU mode chosen)

+CDS : <fo>,<mr>[,<ra>,<tora>],<scts>,<dt>,<st>

<bfr>

0 TA buffer of unsolicited result codes defined within this command is

flushed to the TE when <mode> 1...3 is entered (OK response shall be

given before flushing the codes)

1 TA buffer of unsolicited result codes defined within this command is

cleared when <mode> 1...3 is entered.

Examples :

Application to GSM AT+CNMI=0,1,0,0,0 <mt>=1

GSM to application OK

GSM to application +CMTI : « SM », 1 Message received

Application to GSM AT+CNMI=0,2,0,0,0 <mt>=2

GSM to application OK

GSM to application +CMT :"123456","13/01/96

12h30m00s",129,4,32,240,"15379",129

,5<CR><LF>

HELLO

Message received

Application to GSM AT+CNMI=0,0,0,1,0 <ds>=1

GSM to application OK

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 66 67

Pas de commentaire

Wavecom G900 Manuel d'utilisateur Page 34