Wavecom G2 Guide de l'utilisateur télécharger pdf (Page 30)

Chapter 3 – Using Your Wireless Modem

30 MultiModem Cell User Guide

Disconnecting

To disconnect the connection:

1. Right click on the connection icon in your system tray.

2. From the menu that appears, select Disconnect.

Generic Dial-Up Method - Non-Windows

1. If CDMA, dial onto the network using AT#777

2. If GPRS/EDGE:

a. To set up an Access Point Name (APN) enter:

AT+CGDCONT=1, “IP”,”<APNSERVER>”

Where <APNSERVER> is the APN server supplied by your carrier.

b. Dial onto the network using AT*99***1#

Serial Baud Rate

Your MultiModem Cell is defaulted to a serial baud rate of 115200 from the factory. To enjoy faster baud rates,

you can manually set the modem to a higher speed (230400, 460800, or 921600) using the AT+IPR=<baudspeed>.

However, you must make sure the host serial port is capable of the new speed. If the new speed is set and the

host hardware is not capable of the higher speed, you need to find a host that is capable.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 38 39

Pas de commentaire

Wavecom G2 Guide de l'utilisateur Page 30